What a Bargain!

I have to share with you the great bargain I found at our local New & Used store.  I found four of these chairs for $14.95 each.  I just couldn't pass them up so I bought all four.  They need some cosmetic finishing...the wood needs to be refinished and I definitely need to recover them or make slipcovers for them, but other than that, they are very sturdy and very comfortable. 

Now, I need some suggestions and help from all of you.  My husband built our table a few years ago, as we needed a table to sit twelve people.  (I had my family come for Christmas.)  He also had plans to build 12 chairs, but ran out of time after finishing six chairs.  I think he has since lost interest in finishing the remaining chairs, so I have been on the hunt to "outfit" my table.

 Here are a few questions that you can help me with:

1.  Should I only use two of the new chairs - one at each end of the table and keep the existing chairs?  Or, should I use all four and find two other chairs for each end of the table and keep the existings chairs for extra?
2.  Should I recover them or sew slipcovers?  If slipcovers, a ruffle at the bottom?
3.  What color of fabric?  I love all the white slipcovers out there, but I don't think that would fit in my house.  So, any suggestions?  My kitchen is a tan colour with a cinnamon color accent, wood floors and white cupboards.
4.  Should I paint my table?  I had thought about painting the bottom of it a creamy white and then refinishing the tabletop with a dark walnut stain.

Your help and suggestions would be welcomed!!

Thank you for stopping by.
Lesa

Another Wall Art Project...

Here's another wall art project I'd like to share with you...

You'll need:

MDF board - 2 pieces 1 1/2" wide x 18" long
                    - 2 pieces 1 1/2" wide x 6 1/2" long
(There will create your frame.)
Burlap
Glass
DecoArt paint - Lamp Black and Light Cinnamon
Rust-oleum Frosted Glass
Masking Tape
Sandpaper
Elmer's Spray Adhesive
Wood glue
Mat board in a light cinnamon color.   (Just a note...the color you choose with show through the weave of the burlap.)

How To:
1.  Cut the MDF to the proper width and length.  Create a 1/4" rabet using a router or a tablesaw.

2.  Use glue and claps to secure the wood at all four corners, creating your frame.

3.  Paint the frame using Light Cinnamon.

4.  When dry, apply candle wax to the edges and top of the painted frame.  Now apply Lamp Black to the frame and let dry.

5.  Sand the frame revealing the bottom color to give the fram a more weathered look.

6.  Cut your glass to fit inside the frame.  Apply masking tape to the top of the glass 1/2" in from all edges to create a rectangle.

7.  Spray with frosted glass and let dry.  Remove the tape.

8.  Center and tape the lettering on the back of the glass.  Use Lamp black to apply lettering to the glass.  (Just a note...the frosted glass makes painting on glass very easy, giving the paint something to adhere to.)

9.  Cut the mat board and burlap to the same size as the glass.

10. Use the spray adhesive to secure your burlap to the mat board.  As I mentioned, the background will show through the weave of the burlap.

11. Place the glass on top of the burlap and place in frame.  Secure in place.  I covered the back with brown kraft paper to give it a more finished look.  It also keeps dust from getting in behind the glass.  Attach a self-leveling hanger.

I have a few more ideas using this technique so I hope you will continue to check back for other projects.  Would love to hear your feedback!  Thanks for taking the time to stop by!
Lesa

Dremel Trio

I received a new power tool for Christmas, the Dremel Trio and I absolutely love it.  This tool cuts, sands and routs.  It really is amazing.  What I love is that you can start your cut whenever you want because the bit allows you to make quick and easy plunge cuts anywhere in your work and its very easy to control.

When I made this tray for my ottoman, I had to pre-drill holes in each section before I could use the jigsaw.  Plus, the jigsaw is much harder to control in the corners.  I found myself stopping and continually repositioning the wood piece.  Very time consuming.

However, the Dremel Trio not only allows you to plunge cut, but it also cuts in any direction while keeping the tool in the same orientation.  It makes cleaner cuts and smoother edges requiring less sanding.

This tool is a "new addition" to our workshop, so I'm still learning all about it's multiple uses.  If you like woodworking this is a "must have".

Below,  is my first project attempt with the Dremel Trio.  I love old architectural pieces, so I thought I'd try making a door crown (to look like an old architectural piece).

First I drew a pattern on paper and cut it out.  Then I traced it onto my wood.  I used plywood as this was all I had at the time.  Then I cut it out...yes, with my Dremel Trio.   I then sanded the edges with...you guessed it, the Dremel Trio.  I used a palm samder to sand the top and bottom.

I applied a coat of dark brown paint.  Once dry, I applied a lighter shade of brown paint followed by a final coat of cream-colored paint, letting it dry in between coats.  (I forgot to mention that in between each coat of paint I rubbed candle wax over parts of the wood surface and edges allowing for easier paint removal during the final stage.)

Once it was completely dry, I started sanding the piece to reveal the layers of paint underneath.  I finished by applying dark walnut Danish Oil with a rag and then wiping off to give it more of an old, antiqued appearance.  Attach a self-leveling hanger of the back and I was done.  I hope you like this project.

Thank you for taking the time to stop by.

I am linking to:  Funky Junk Interiors
                        Finding Fabulous "Frugalicious Friday"

Lesa

Live Laugh Love

Here's a project I'd like to share with all of you.  It's my Live Laugh Love plaque.  I made it so I could hang it on the wall, however, I thought it looked good in the wrought iron easel sitting on the dresser at the front entrance.  I combined a bit of woodworking, modge podge and painting to this project.  Here's a bit of a tutorial.

Things you'll need:

Scrap plywood in assorted thicknesses.  (1/4", 1/2", 3/4")
3/4" pine
Scrapbooking paper in colors of choice
Modge Podge OR you can make your own like I did by using white glue mixed with water (to thin it out) and then add approximately 1 tbsp of varnish.  Stir and store in a jar. 
Paint (I used a dark brown paint I had left over from painting a piece of furniture, as well, I used DecorArt Acrylic paint in Arbor Green,  Antique Rose & Buttermilk)
Antiquing medium
Wood Glue
Cardboard

1.  Cut pieces from plywood.  The diagram below shows you the dimensions and thicknesses to cut.  Just a note...the overall dimensions of the plaque is 12" x 12".

2.  For the frame, cut the following from pine:
       2 pieces - 12"long x 7/8" wide  (these are the top and bottom)
       2 pieces - 13 3/4" long x 7/8" wide (these are the sides)

3.  Cut 2 Fleur de Lis from 1/4" plywood.

4.  Lightly sand all the pieces.

5.  Paint the plaque pieces and Fleur de Lis dark brown and let dry.  Apply Buttermilk to the top of the Fleur de Lis, let dry, then sand to reveal the dark brown.  Antique.

6.  Paint the frame pieces with Buttermilk and let dry.  Now apply a coat of dark brown, again, let dry.  Sand to reveal the buttermilk.  Antique.

7.  Trace the plaque pieces onto scrapbook paper and cut each approximately 1/8" smaller (on all sides)  than the actual size.  Apply modge podge to the wood and then the back of the paper. 

8.  Put paper onto the wood pieces and then apply more modge podge to the top of the paper.  Let dry and then lightly sand all pieces.

9.  Apply lettering to the large plaque square.  I painted "Live" with Arbor Green, "Laugh" with Buttermilk and "Love" with Antique Rose.  However, if you are lucky enough to own a Silhouette then you could use that to make your lettering.  Once the lettering is dry, antique all the plaque pieces.

(Enlarge lettering to appropriate size)

10. Cut a piece of cardboard 13 3/4" x 13 3/4" for the backing.  Arrange the plaque pieces and frame pieces on the cardboard and glue in place.  Attach to Fleur de Lis with wood glue.  Let dry.  Attach a hanger to the back.

I hope you enjoy this project.  Thank you for stopping by!

Lesa

I'm linking to:  Sew Dang Cute Crafts "Crafting with the Stars"
                      Blue Cricket Design "Show and Tell"
                      The DIY Showoff



Decorated for Christmas

I just wanted to share a few photos of my home at Christmas.  And, just an update with respect to my post "The Family Christmas Tree", I added my ornaments to my tree and now it feels complete.

This year's ornament to add to my collection from my Mom.

\

Quilted Tree Skirt

Kitchen Tree

Well, there you have it...just a bit of Christmas around my home.  Thank you for taking the time to stop by.  I hope you enjoyed your visit as much as I enjoy visiting all of you! 

Lesa


I've linked to Thrifty Decor Chick's Christmas Tree Party and Open House at Coastal Charm