Candleplace

I needed something as a centerpiece for my outdoor coffee table and I knew I wanted something with candles.  Therefore, I came up with this idea for a "candleplace". 

It was very simple to construct and it works well for what I wanted on the table.  The glass helps to shelter the flame and gives it a nice glow, especially in the evening!
 To build the box, I used scrap wood left over from building the outdoor furniture.  

Bottom of box - 13 1/2" x 5" (pine)
Sides - 13 1/2" (cut from 1x4 pine)
Ends - 6 1/2" (cut from 1x4 pine)

Assemble the box using wood glue and wood screws.

Next, I took the inside measurement of the box and cut my glass to fit (on the inside).  I cut the glass to measure 8" high.  I assembled the glass box using hot glue, but I'm sure there are products out there specifically used for glass.  I was only using what I had on hand at the time. 

The box was a little boring, as is, so I decided to make some "chunky" handles for the ends.  Just a note...the handles are decorative only!    Using more scrap 1x4 pine, I made the handles to look like this...

I spray painted the handles with Krylon's Oil Rubbed Bronze and painted the box with my new favorite blue paint.  When dry, I used an old chip brush to apply a dark brown paint over the blue paint.  I lightly sanded all surfaces with 220-grit sandpaper.

I attached the handles with a bit of wood glue and wood screws.  Make sure to pre-drill so the wood does not split.  Insert the glass, add some river rocks and candles and there you have it, a "candleplace".

Thank you so much for stopping by.  I hope you enjoyed your visit!  Have a great day.

Lesa